PDC Drill Bits Using Precautions

PDC Drill Bits is very likely to be damaged due to improper operation during the use. According to these circumstances.

PDC Drill Bits Manufacturer has sorted out some precautions that need attention.

The content is as follows:

1. Drill down to control the speed to prevent sudden resistance, so that the roller bit can play a better effect.

2. Do not touch the cone wheel gear when picking up or unloading the oil drill bit.

3. It is necessary to keep the mud clean and prevent the oil bit from blocking the oil eye, which affects the use of the oil drill bit.

4. Keep the water on both pumps intact.

 5. Adjust the drilling parameters in time when encountering boring and jumping.

6. The drill bit is drilled in the end, first cycle for about ten minutes, send the drill evenly, prevent the blast from suddenly damaging the tooth, and when the drill is slow, analyze it. If it is because of the mezzanine, be patient. Do not blindly add the pressure.

 7. Keep the bottom of the well clean and free of debris. Drill and drill into the wellhead with steel plate and cover the wellhead insurance pin and wellhead tool to prevent the wellhead from falling.

8.Pay attention to the oil drill bit to prevent slipping and drilling.

For more information about Pdc Drill Bits Factory, please contact drilling.wang@gmail.com or call us.